6063-T5 extruded aluminum mill finish 1″ wide x 2-1/2″ high, .125″ thick

2 Derlin wheels riveted to formed steel body with swivel hook, Nylatron glide strips reduce friction and noise

2 nylon-tired shielded ball bearing wheels riveted to steel body with swivel hook, Nylatron glide strips reduce friction and noise

4″ diameter Nylatron GS sheave with shielded ball bearings, steel housing clamps to track

Heavy-duty 4″ diameter Nylatron GSM sheave with sealed precision ball bearings, steel housing clamps to track, 3/16″ groove for use with motorized tracks

2-1/2″ diameter steel sheave with sealed precision ball bearings, steel housing clamps to track, for one-way draw operation

Formed steel clamps to align track at overlap

2 Derlin wheel assemblies with swivel hook pivot on formed steel body, supplied with 2 clamps for anchoring operating line or cable, 1 pair required for overlapping tracks

2 nylon-tired shielded ball bearing wheel assemblies with swivel hooks pivot on formed steel body, supplied with 2 clamps for anchoring operating line or cable, 1 pair required for overlapping tracks

4″ diameter Nylatron GS sheave with shielded ball bearing, steel housing clamps to track

Heavy-duty 4″ diameter Nylatron GSM sheaves with sealed precision ball bearings, steel housing clamps to track, 3/16″ groove for use with motorized tracks

Special steel housing contains 2-1/2″ diameter Nylatron GS sheaves with shielded ball bearings, used when operating lines must be turned horizontally toward curtain machine or mule block

Formed steel brackets clamp to track, adjusts to any position, 1 pair pictured

Steel plate mounts flush to ceiling, track clamps to bracket with offset clips

Chain added to carriers to provide 6″ of curtain height adjustment

Zinc plated switch to allow intersecting tracks on stage layouts

6″x6″ zinc plated bracket for track wall mount applications

Steel plates align and lock track sections together, track must be straight at joint, 1 pair pictured

Formed steel bracket bolts to track to support operating line and prevent carriers from traveling beyond desired location, 1 pair required for overlapping tracks

Heavy steel construction with nylon-tired shielded ball bearing wheels, supplied with brackets for 1-3/8″ OD pipe of tubing (6′ max recommended length), allows masking draperies to be rotated to any angle, working load limit: 75 lbs

Pivot device with special plate to index rotation at 22.5° increments, supplied with brackets for 1-3/8″ OD pipe of tubing (6′ max recommended length), working load limit: 75 lbs

Spring equipped arm with neoprene pad, add to pivot device to prevent undesired movement along track

Spring equipped arm with neoprene pad, add to pivot device to prevent undesired movement along track

1/4″ diameter black polyester braided over solid aramid core for manual operation

Black polyester jacket braided over 3/32″ galvanized aircraft cable, for use with motorized tracks

4″ diameter Nylatron GS sheave with shielded ball bearing in steel housing, 9″ vertical adjustment

Formed steel housing contains two ball bearing guides for operating line to follow curve, mount to inside of curve on double end pulley section of track

Formed steel housing contains one ball bearing guide for operating line to follow curve, mount to inside of curve on single end pulley section of track

Formed steel housing contains one ball bearing guide for operating line to follow curve, mount to outside of curve on single end pulley section of track

Mounted Steel tool designed for manual bending of aluminum tracks, must be anchored to floor or stationary table

Portable Heavy steel tool designed for manual, on-the-job bending of aluminum tracks